More Plastics Information
American Plastics Council (APC) is a trade association for the United States plastics industry, representing the nations largest manufacturers of
plastics. APC also includes seven business units and an affiliated trade association. SPI is the trade association
representing the entire plastics industry supply chain, including processors, machinery and equipment manufacturers and raw
- Just the Facts
- How Plastics Are Made
- Plastics Recycling
- Markets for Recovered Plastics
- Source Reduction
Plastics play an important role in almost every aspect of our lives. Plastics are used to manufacture everyday products such as beverage containers, toys, and furniture. The widespread use of plastics demands proper end of life management. Plastics make up almost 13 percent of the municipal solid waste stream, a dramatic increase from 1960, when plastics were less than one percent of the waste stream. The largest category of plastics are found in containers and packaging (e.g., soft drink bottles, lids, shampoo bottles), but they also are found in durable (e.g., appliances, furniture) and nondurable goods (e.g., diapers, trash bags, cups and utensils, medical devices). The recycling rate for different types of plastic varies greatly, resulting in an overall plastics recycling rate of only 8 percent, or 2.7 million tons in 2011. However, the recycling rate for some plastics is much higher, for example in 2011, 29 percent of HDPE bottles and 29 percent of PET bottles and jars were recycled.
Just the Facts
- 32 million tons of plastic waste were generated in 2011, representing 12.7 percent of total MSW.
- In 2011, the United States generated almost 14 million tons of plastics as containers and packaging, about 11 million tons as durable goods such as appliances, and almost 7 million tons as nondurable goods, such as plates and cups.
- Only 8 percent of the total plastic waste generated in 2011 was recovered for recycling.
- In 2011, the category of plastics which includes bags, sacks, and wraps was recycled at about 11 percent.
- Plastics also are found in automobiles, but recycling of these materials is counted separately from the MSW recycling rate.
How Plastics Are Made
Plastics can be divided in to two major categories: thermosets and thermoplastics. A thermoset solidifies or sets irreversibly when heated. They are useful for their durability and strength, and are therefore used primarily in automobiles and construction applications. Other uses are adhesives, inks, and coatings.
A thermoplastic softens when exposed to heat and returns to original condition at room temperature. Thermoplastics can easily be shaped and molded into products such as milk jugs, floor coverings, credit cards, and carpet fibers.
According to the American Chemistry Council, about 1,800 US businesses handle or reclaim post-consumer plastics. Plastics from MSW are usually collected from curbside recycling bins or drop-off sites. Then, they go to a material recovery facility, where the materials are sorted into broad categories (plastics, paper, glass, etc.). The resulting mixed plastics are sorted by plastic type, baled, and sent to a reclaiming facility. At the facility, any trash or dirt is sorted out, then the plastic is washed and ground into small flakes. A flotation tank then further separates contaminants, based on their different densities. Flakes are then dried, melted, filtered, and formed into pellets. The pellets are shipped to product manufacturing plants, where they are made into new plastic products.
Resin Identification Code
The resin identification coding system for plastic, represented by the numbers on the bottom of plastic containers, was introduced by SPI, the plastics industry trade association, in 1988. Municipal recycling programs traditionally target packaging containers, and the SPI coding system offered a way to identify the resin content of bottles and containers commonly found in the residential waste stream. Plastic household containers are usually marked with a number that indicates the type of plastic. Consumers can then use this information to determine whether or not certain plastic types are collected for recycling in their area. Contrary to common belief, just because a plastic product has the resin number in a triangle, which looks very similar to the recycling symbol, it does not mean it is collected for recycling.
SPI Resin Identification Code 1 2 3 4 5 6 7 Type of Resin Content PET HDPE Vinyl LDPE PP PS OTHER
- PET - Polyethylene Terephthalate
- HDPE - High-density Polyethylene
- LDPE - Low-density Polyethylene
- PP - Polypropylene
- PS - Polystyrene
- Other - Mixed Plastics
Markets for Recovered Plastics
Markets for some recycled plastic resins, such as PET and HDPE, are stable and even expanding in the United States. Currently, the US has the capacity to be recycling plastics at a greater rate. The capacity to process post-consumer plastics and the market demand for recovered plastic resin exceeds the amount of post-consumer plastics recovered from the waste stream. The primary market for recycled PET bottles continues to be fiber for carpet and textiles, while the primary market for recycled HDPE is bottles, according to the American Chemistry Council.
Looking forward, new end uses for recycled PET bottles might include coating for corrugated paper and other natural fibers to make waterproof products like shipping containers. PET can even be recycled into clothing, such as fleece jackets. Recovered HDPE can be manufactured into recycled-content landscape and garden products, such as lawn chairs and garden edging.
Source reduction is the process of reducing the amount of waste that is generated. The plastics industry has successfully been able to reduce the amount of material needed to make packaging for consumer products. Plastic packaging is generally more lightweight than its alternatives, such as glass, paper, or metal. Lighter weight materials require less fuel to transport and result in less material in the waste stream.