Where can I find the analytical results from drinking water samples?
All RadNet drinking water sampling results are available on the RadNet Envirofacts website. For more information, visit RadNet. Return to Frequent Questions About RadNet.
An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock () or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
All RadNet drinking water sampling results are available on the RadNet Envirofacts website. For more information, visit RadNet. Return to Frequent Questions About RadNet.
Samples of precipitation such as rain, snow or sleet are collected at more than 25 stations across the U.S. Samples are collected using specially designed precipitation collection devices which funnel the precipitation into a bucket for transfer to a shipping container. EPA’s National Analytical Radiation Environmental Laboratory (NAREL) receives the…
The EPA’s RadNet monitoring network is designed to track fluctuations in airborne radioactive particles. RadNet does not track non-ionizing radiation that comes from power lines, transmitters, or cell phone networks like 5G.
EPA reports RadNet laboratory results in conventional units, as shown below with their international equivalents: Medium Conventional unit International SI unit Air Filter Curie (Ci) per cubic meter (m3) Becquerel (Bq) per cubic meter (m3) Precipitation and drinking water Curie (Ci) per liter (L) Becquerel (Bq) per liter (L) Results…
Will RMP*Comp be updated? If so, would I have to redo calculations I might already have made with an earlier version? No, you do not have to redo your work if you have already completed your consequence analyses. RMP*Comp is based on the EPA's Offsite Consequence Analysis Guidance (OCA Guidance)…
I've noticed that for certain chemicals, RMP*Comp gives substantially different distances to the toxic endpoint than previous versions. Why? In the current version of RMP*Comp, we have incorporated new chemical-specific distance tables for ammonia, chlorine, and sulfur dioxide. The generic tables are still used for other chemicals (you can see…
Does RMP*Comp perform some math or modelling in order to arrive at an endpoint distance, or is it simply interpolating from the tables in the EPA's Offsite Consequence Analysis Guidance (OCA Guidance)? RMP*Comp follows the procedures set out in the OCA Guidance. This means that for some scenarios, the endpoint…
My process includes a series of interconnected units, as well as several storage vessels that are co-located. Several sections of the process could qualify for Program 1. Can I divide my process into sections for the purpose of assigning Program levels? No, you cannot subdivide a process for this purpose…
If a stationary source has several processes that are covered under 40 CFR Part 68, and some of those processes have had an accidental release within the past five years (effectively making those processes ineligible for Program 1 status), are the individual processes from which no accidents have occurred also…
A process covered under 40 CFR Part 68 is eligible for Program 1 requirements if it meets all of the criteria listed at 40 CFR §68.10(b). Those criteria include a requirement that the process cannot have had an accidental release of a regulated substance that led to offsite death, injury…
I have a tank with 1,000,000 pounds of toluene diisocyanate (TDI), which is covered under the RMP rule, but not under OSHA PSM. Considered by itself, the TDI would be Program 2 for EPA. The tank, however, is close to equipment that has chlorine above the applicable threshold and is…
If five years have passed since the last accident involving a covered process, and that process meets the other two requirements identified under 40 CFR §68.10(b) for Program 1 eligibility, could that process become a Program 1 process even if it had previously been identified as a Program 2 or…
The EPA operates 140 radiation air monitors across the United States as part of its RadNet nationwide monitoring system. RadNet air monitors measure gamma radiation emitted from airborne radioactive particles as they collect on the monitor’s air filter. Near-real-time data are continually reviewed by computer, and if the results show…
It is very common for natural background radiation levels to change during precipitation events such as rain, sleet or snow. While there are many more factors that affect radiation levels than just precipitation, radon and radon decay products, which occur naturally may be captured in the precipitation and brought to…
More than 60 drinking water sampling locations reported results in the United States in 2018 as part of the RadNet monitoring network. Drinking water samples are typically collected four times a year from taps and are sent to the EPA’s National Analytical Radiation Environmental Laboratory (NAREL) for analysis. Each of…