Green Power Partnership
EPA Green Power Partner Mark Use & Display Guidelines
- General Guidelines
- Correct Use of the Partner Mark
- Inappropriate Use of the Partner Mark
- Partner Mark Use Specifications
- EPA Review Policy
To maintain the integrity of the Green Power Partner mark, EPA requires that Partner organizations use the mark in accordance with the following standards and guidelines:
- Green Power Partners (i.e., organizations that have submitted a Partnership Agreement to EPA) are welcome to use the Partner mark to indicate that they are Green Power Partners.
- EPA recommends that Partners use the mark in conjunction with messaging about green power and their organization's partnership with EPA. For example, "We purchase green power in amounts that meet EPA's requirements."
- The Green Power Partner mark may not be used in any way that implies EPA endorsement of a product or organization.
- Organizations may not use EPA's Green Power Partnership Mark in place of the Green Power Partner Mark.
- All uses of the Partner mark should be approved by EPA. For further information, please contact Melissa Klein (email@example.com, 202-343-9207).
Correct Use of the Partner Mark
By signing the Partnership Agreement, organizations enter into an agreement with the Green Power Partnership to use its name and Partner mark as described below:
- The Partner mark can be used on Partner Web sites and Partner information materials (e.g., brochures, annual reports) that are describing the organization as a Green Power Partner or discussing the organization's use of green power.
- Partners may only use the Partner mark in conjunction with the scope or level at which the organization has joined the Partnership. An organization may join the Partnership for a facility, a group of facilities, or for the entire organization on a national basis. If an organization joins the Partnership for just one of its facilities, or for any subset of the organization's U.S. operations, Partnership benefits — including mark use — extend only to that facility or subset of the organization.
- Partners are responsible for their own use of the Green Power Partner mark, as well as the mark's use by their representatives or third parties acting on their behalf.
- The Green Power Partner name should not be used in such a way as to imply that the Partner or Partnership is selling a green power product or service.
- The EPA may change the terms of Partner mark use guidelines and has the right to terminate or withdraw license to use the mark.
Inappropriate Use of the Partner Mark
- Use of the Partner mark on products is not appropriate.
- The mark may not be used in any manner that would imply EPA endorsement of a company, its products, or its services. Neither the mark nor the name "Green Power Partner" may be used as part of any other company name, product name, service name, domain name, Web site title, or the like.
- The mark may not be altered, recreated, cut apart, separated, incorporated into other mark or logo designs, or otherwise distorted in perspective or appearance.
- The mark may not be associated with purchases of green power that do not qualify for the Green Power Partnership.
- Organizations that are not Green Power Partners (e.g., vendors of green power or other affiliated organizations) may not use the Partner mark; however they may link to the Green Power Partnership's Web site.
Partner Mark Use Specifications
A) Partner Mark Art
- PANTONE® color specifications for the 2 spot-color version
Pantone 287 (blue) and Pantone 144 (orange)
- Color specifications for the 4-color (CMYK) version
Blue: C=100, M=69, Y=0, K=11 Orange: C=0, M=47, Y=100, K=0
- Color specifications for the RGB version
Blue: R=0, G=82, B=156 Orange: R=248, G=153, B=29
- Specifications for the black and white version
100 percent black and 25 percent black.
B) Partner Mark Sizes
- In print materials, for legibility, the mark should not be reproduced smaller than 1.5 inches long by 0.66 inches high, with a border of one-eighth inch around all sides separating it from text or other graphic elements. In Web and other electronic media, for legibility, the mark should not be smaller than 110 pixels by 55 pixels.
- The mark may be resized, but the correct aspect ratio must be maintained. When resizing the Partner mark for inclusion in materials such as PowerPoint presentations and Microsoft Word documents, holding down the "Shift" key while resizing the image will constrain the aspect ratio.
- When the Green Power Partner mark is displayed online it must contain a click-through link to the Green Power Partnership Web site: http://www.epa.gov/greenpower/index.htm.
Violations of the Partner Mark
EPA monitors the proper use of the Green Power Partnership name and Partner mark. The following explains the general course of action for addressing mark violations:
- Anyone who misuses the marks will be contacted in writing or by telephone.
- A reasonable amount of time will be given to correct the error(s). The timeframe will depend on the medium in which the violation appeared and the severity of the misuse.
- After notification, EPA will monitor to ensure that the error(s) has been corrected. Failure to make the required changes may result in termination of a Partner's participation in the Partnership and/or legal action.
EPA Review Policy
EPA requires review of advertisements or collateral materials on which the Partner mark is used. Partners should contact EPA to discuss this issue.
To discuss Partner mark use details, contact Mollie Lemon (firstname.lastname@example.org, 202-343-9859).
EPA Green Power Partner Mark Use Guidelines (PDF) (2 pp, 150K, About PDF)
EPA Green Power Partner mark in jpg format (88K JPG)
EPA Green Power Partner mark in tif format (1.3MB TIF)
EPA Green Power Partner mark in eps format (687 KB EPS)