![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
South Carolina State Implementation Plan
South Carolina State Implementation Plan
Regulation No. 62.1, Definitions, Permit Requirements, and Emissions Inventory
Section I - Definitions
Section II - Permit Requirements
Section III - Emissions Inventory
[Top]
Regulation No. 62.2, Prohibition of Open Burning
[Top]
Regulation No. 62.3, Air Pollution Episodes Section I - Episode Criteria Section II - Emission Reduction Requirements
[Top]
Regulation No. 62.4, Hazardous Air Pollution Conditions
[Top]
Regulation No. 62.5, Air Pollution Control Standards
[Top]
Standard No. 1, Emissions from Fuel Burning Operations Section I - Visible Emissions Section II - Particulate Emissions Section III - Sulfur Dioxide Emissions Section IV - Opacity Monitoring Requirements Section V - Exemptions Section VI - Periodic Testing Section VII - Source Test Requirements
[Top]
Standard No. 2, Ambient Air Quality Standards
[Top]
Standard No. 3, Emissions from Incinerators
[Top]
Standard No. 4, Emissions from Process Industries Section I - General Section II - Sulfuric Acid Manufacturing Plants Section III - Kraft Pulp and Paper Manufacturing Section IV - Portland Cement Manufacturing Plants Section V - Cotton Gins Section VI - Hot Mix Asphalt Plants Section VII - Metal Refining Section VIII - Other Manufacturing Section IX - Visible Emissions Not Specified Elsewhere Section X - Non-Enclosed Operations Section XI - Total Reduced Sulfur Emissions of Kraft Pulp Mills Section XII - Periodic Testing Section XIII - Source Test Requirements
[Top]
Standard No. 5, Volatile Organic Compounds Section I - General Provisions Section II - Provisions for Specific Sources Part A. Surface Coating of Cans Part B. Surface Coating of Coils Part C. Surface Coating of Paper, Vinyl & Fabric Part D. Surface Coating of Metal Furniture & Large Appliances Part E. Surface Coating of Magnet Wire Part F. Surface Coating of Miscellaneous Metal Parts & Products Part G. Surface Coating of Flat Wood Paneling Part H. Graphic Arts - Rotogravure & Flexography Part I. through M. (Reserved) Part N. Solvent Metal Cleaning Part O. Petroleum Liquid Storage in Fixed Roof Tanks Part P. Petroleum Liquid Storage in External Floating Roof Tanks Part Q. Manufacture of Synthesized Pharmaceutical Products Part R. Manufacture of Pneumatic Rubber Tires Part S. Cutback Asphalt Part T. Bulk Gasoline Terminals and Vapor Collection Systems
[Top]
Standard No. 6, Alternative Emission Limitation Options Section I - General Section II - Conditions for Approval Part A. Emissions of Total Suspended Particulate or Sulfur Dioxide Part B. Emissions of Volatile Organic Compounds Part C. Emissions of Nitrogen Dioxide, Carbon Monoxide, or Lead Part D. Designated Pollutants Part E. De Minimis Cases Section III - Enforceability
[Top]
Standard No. 7, Prevention of Significant Deterioration Section I - Definitions Section II - Ambient Air Limits Section III - Review of Major Plants and Major Modifications -- Applicability and Exemptions Section IV - Review Requirements
[Top]
Regulation No. 62.6, Control of Fugitive Particulate Matter Section I - Control of Fugitive Particulate Matter in Non-Attainment Areas Section II - Control of Fugitive Particulate Matter in Problem Areas Section III - Control of Fugitive Particulate Matter Statewide Section IV - Effective Date
[Top]
Regulation No. 62.7, Good Engineering Practice Stack Height
[Top]
For information about the contents of this page please contact Nacosta Ward